My Car
Find Parts
What's New?

Progress Group Suspension Rear Sway-Bar, 25.4mm Adjustable, 2009-14 Acura TSX All Models, 62.0107

Part Number:
62.0107
Brand:
Progress Group
Product Line:
Adjustable Anti-Sway Bar Kit (25.4mm Adjustable)
Vehicle Fitment:
Acura TSX, 2009-14
Position:
Rear
Progress Group Suspension Rear Sway-Bar, 25.4mm Adjustable, 2009-14 Acura TSX All Models, 62.0107

$0.00$0.00
    Cancel OK

    Add Progress Rear Endlinks

    Details

    Progress Tech has developed a new tubular rear sway bar kit for 8/9th Gen Accords. Now 2008-2017 Accord & 2009-2014 Acura TSX owners have a choice. Our 22.2mm 'standard' sway bar or a more aggressive 25.4mm tubular 'sport' option. Tubular bars provide the necessary rate with less mass than a equivalent solid bar. The new bar is a two-hole adjustable design with lateral stop rings for instant bar response. The larger diameter bar works well with wider wheels & UHP tires, as more grip requires more roll control. This larger option will suit more aggressive drivers looking for flat and balanced and 'closer to neutral' cornering.

    Progress Suspension anti-roll bars (or sway bars) dramatically improve handling by reducing the traction-robbing body ügleanüh that rolls part of the outside tires off the pavement. Progress Groups's Sport-tuned Anti-roll bars replace skinny OEM bars and rubber bushings with larger diameter (stiffer) alloy steel bars and polyurethane bushings. More roll stiffness means less body lean, and the tires stay flatter on the pavement (larger contact patches). The result is more grip and added driver control!

     

    • Less body roll means more traction, faster cornering speeds, and increased driver confidence.
    • Polyurethane bushings produce crisp response on turn-in.
    • THIS IS A 25.4MM BAR WITH TWO MOUNTING HOLES FOR STIFFNESS ADJUSTMENT. THIS IS AN ADJUSTABLE SWAY BAR WHICH ALLOWS YOU TO FINE TUNE THE HANDLING OF YOUR CAR
    • Installation does not impact alignment angles
    • Ride quality is not impacted over straight roads; only noticeable while cornering or transversing uneven surfaces.

    Progress Anti-roll bars are cold-formed in-house using custom-built precision bending equipment. Both laser-cut and CNC bar ends are MIG welded in place using a precise fixture for an exact fit.

    Related products

    Customer Questions

    Q:

    1. Do I need new/beefier end links to go with the Progress 22mm sway bar or can I reside the original ones that are on there now? (2010 Honda Accord v6, 100k miles, bone stock)

    2. Given the rest of the car is stock, is it safe to run this bar without doing other upgrades? I heard someone say something about oversteer increasing to dangerous levels.

    A:

    1) No, you can reuse the stock ones.

    2) Absolutely, although I would keep it on the softer adjustment setting to avoid putting too much stress on the chassis mounts. The people who are stating danger of oversteer are grossly overstating a minimal change in chassis dynamics (the car CAN be caused to oversteer more, but you must do this with intention. It is unlikely to happen on accident or as a surprise.)

    Customers Also Bought

    Ratings

    Overall:

    Rate and Review