My Car
Find Parts
What's New?

Innovative Mounts Steel & Polyurethane Engine Mount Set, 2004-2008 Acura TSX, 10751

Part Number:
Innovative Mounts
Product Line:
Steel & Polyurethane Engine Mount Set
Vehicle Fitment:
Acura TSX, 2004-08
Innovative Mounts Steel & Polyurethane Engine Mount Set, 2004-2008 Acura TSX, 10751



5% below retail
Shipping Included! Need help?


Innovative Mounts manufacturers top-quality engine mounts for a variety of vehicles. All their mounts are produced in-house from raw materials. Innovative machines, laser cuts, assembles, and welds, and assembles their mounts in hand. They even mold their own polyurethane bushings! Innovative offers two main forms of mounts: Steel and Aluminum.

Innovative Steel mounts are made from laser cut and formed steel plates which are fit together and welded in rigid shapes, specific to each application. They are finished in a high quality powdercoat before final assembly with bushings of your own durometer choice. These mounts are economical and highly effective at limiting engine movement.

Innovative Aluminum mounts are made from billet aluminum stock which is machined to a high-luster finish. Stress analysis ensures strength and reliability. Again, a variety of mount bushings may be had to suit your needs.

Innovative Mounts' polyurethane bushings are available in a variety of durometers, or "stiffnesses." 60A is usually the lowest, providing reduced engine movement over stock and more durability. 75A, 85A, and 95A are all progressively firmer. Generally, the power level and use of the car will determine the mount bushing selection. If it's a street car, stick with 60-75A. For more aggressive drag launches or competition use, go with the 85A-95A. IN ANY CASE, Poly bushings are firmer than rubber ones, so expect a noticeable increase in cabin noise and chassis vibrations when installing performance Innovative Mounts.

Innovative can also offer custom colors on both the mounts and the bushings. If this is what you are after, send us a message! We'd be glad to get the mount set you are looking for!

Manufactuer's Copy:

NOTE: It is strongly recommended that all installs be done by a mechanic or automotive specialist. Mounts CAN NOT be returned or swapped out after they have been bolted down (revealing bolt impressions). PLEASE MAKE SURE THIS KIT FITS YOUR VEHICLE BEFORE BOLTING THEM IN PLACE.

NOTE: Innovative Engine Mounts are built for performance driving. Although Innovative's bushings are made to absorb engine vibration, you may still notice slight vibration depending on your engine's series and HP. Innovative Mounts removes the dampenine oil containers harbored by OEM/Stock mounts. By switching to stiffer mounts without the fluid reduces wheel hop and increases driving response.

  • Unique no-tear vibration minimizing bushings
  • CAD/CAM Designed
  • Stress Analyzed
  • Lifetime Warranty

Customer Questions


What are the torque specs for the 75a mounts?


The mounting hardware is all suggested to be torqued to factory specs with installing these mounts.


Do you recommend 60a or 75a? Currently NA soon to be super charged.


We would recommend the 75A which is going to provide more performance benefit than the 60A but will not have a change in noise and vibration over the 60A. Note that either is going to be quite noticeable as compared to stock mounts.

Q:Hi there, just wanted to know if this mount set will also fit the Aus spec, cl9 Honda Accord euro (6sp manual)which is right hand drive? Cheers

Yes it would be a direct fit to your CL9.

Q:Hi there, would like to know if this mounting set will also fit the JDM CL7R Honda Accord Euro (6sp manual) which is right hand drive in Singapore?

Yes this mount set we do believe fits in RHD CL7/CL9 chassis.

Q:will these work with the automatic transmission as well as the manual transmission?

Yes these mounts fit on both AT and MT TSXs.

Q:It's it possible to replace the bushing in the mount?

Yes it is. Sometimes it is easiest to send mounts in for bushing replacement but we do offer bushings as well that you can replace on your own. They need to be pressed in.

Q:Hi can I just buy the rear mounting for this CL7/CL9?

Customers Also Bought



Rate and Review