My Car
Find Parts
What's New?

Fastline Performance Compliance Bearings by PCI, 4pc set, 2004-08 Acura TL TL-S (ALL), SB-TSX-FL

Part Number:
Fastline Performance
Product Line:
PCI Spherical Compliance Bushing Set
Vehicle Fitment:
Acura TL, 2004-08 (ALL)
Front Lower, 4pc
Fastline Performance Compliance Bearings by PCI, 4pc set, 2004-08 Acura TL TL-S (ALL), SB-TSX-FL



Updated April 18, 2016: This 4-piece bushing set has been discontinued in favor of a new kit which has only the two front compliance bushings.

Updated October 18th, 2017: A limited release of these 4-piece kits has been issued to Heeltoe and these are available to ship now.

The lower control arm compliance bushings on later model Honda and Acura cars are notorious for failing prematurely. This is especially the case for cars with V6 power-trains. The added weight and torque output of the engine wreaks havoc on these bushings, wearing them out in 60,000 miles or less. Very uncharacteristic for a product that is lauded for it's reliability.

Fastline Performance has teamed up with top-level design and production studio Pro-Car Innovations to release a permanent solution to the ever-problematic compliance bushing. Until now, all that could be done to remedy the issue was to replace with new OEM parts. Now, PCI's highly engineered spherical bearing mount has been adapted for use on the popular late-model Acura vehicles that Heeltoe specializes in.

Included with this kit are a pair of spherical bearing compliance bushings and trailing lower control arm bushings. The bearing housings are cnc machined from 6061 aluminum, and anodized. The spacers are cnc machined from 4130 steel, and zinc plated. PCI warranties the product for up to 2 years from manufacturer defects.

Overall benefits:
Reduced torque steer
Better power delivery to the ground
Improved high-speed stability
Reduce wheel hop

Related Tech Notes and Articles

Fastline Compliance Bushing Update: New 2-piece kit supersedes 4-piece kit

One of the most popular upgrades to the front suspension on later model Honda and Acura sedans has been changed. Read more on our...

Compliance bushshing/bearing replacement: Awesome DIY tool parts list
Tech Articles
Changing the compliance bushings out on your later-model Honda or Acura can be a challenge without a tool to push the parts in and out.
First FLP Compliance Bearings by PCI are in!
A solution for the failure-prone compliance bushings on TLs and TSXs has finally arrived!

Related products

Customer Questions


I've got this kit and it comes with 4 bearings. The arm has 3 bushings total on each arm, totaling 6. Which 2 do not get pushed out?


The compliance bearing kit replaces both the bushings on the subframe. Not the one at the lower shock mount.


I've seen this tool used to extract/install factory bushing without removing the control arm. Can this tool be used to install these bearings?

Honda/Acura Front Compliance Bushing R&R Tool #68100


Yes, that tool can be used to install the FLP compliance bearings.


Do these bearings have dust seals to keep the regular grime out?


They do not, although in many years of selling these bearings, "grime," corrosion, or contamination of any other sort have not been an issue. We will guarantee these bearings for as long as you have them!

Q:Do these press in like normal rubber bushings? Can you use a normal bushings pressing rental kit for these? If not, how can you do it diy?
A:Yes these parts install just like the standard rubber bushigns do, pressed in using the same OEM type-tool.

Customers Also Bought



Rate and Review