My Car
Find Parts
What's New?

Radium Engineering PCV Catch Can Kit, 2000-05 Honda S2000 (Left Hand Drive), RAD-S2K-CC-PCV-LHD

Part Number:
Radium Engineering
Product Line:
PCV Catch Can Kit
Vehicle Fitment:
2000-05 Honda S2000 (Left Hand Drive)
Radium Engineering PCV Catch Can Kit, 2000-05 Honda S2000 (Left Hand Drive), RAD-S2K-CC-PCV-LHD



This installation kit was specifically designed for the 00-05 Honda S2000 LHD chassis. It is not compatible with any RHD or 06-09 LHD S2000 models.

An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil-saturated air circulating back into the air intake stream can lead to degraded performance.

The 20-0093 PCV Catch Can Kit (shown below) runs inline with the 3/8" PCV (positive crankcase ventilation) valve. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV "check" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience "metered" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. Note: Because the Radium catch cans are pressure sealed, they are great for boosted applications as well so connecting to the intake manifold is permitted.


-Effectively raises the octane and increased engine performance from cleaner inlet air
-Prevents oil buildup in the intake or intercooler system walls, throttle body, intake manifold, etc.
-Excessive oil collection can be an indicator of a damaged engine.
-Lowers hydrocarbon emissions
-Capacity: 6 fluid ounces
-Height (without fittings): 5 inches
-Outside Diameter: 2.45 inches

PCV Kit Includes:
-Radium billet oil catch can with integrated condenser and dipstick
-Radium laser cut powder coated S2000 specific mounting bracket
-Anodized aluminum 6AN hose ends
-Anodized -6AN adapter fittings
-Stainless steel mounting hardware
-OEM spring hose clamps
-3/8" PCV rubber hose

Customer Questions



Rate and Review