My Car
Find Parts
What's New?

Clutchmasters Billet Aluminum Flywheel, 15 lbs, Honda J35 Engines (07-08 TL-S, 2008-17 Accord V6), FW-040-AL

Part Number:
Product Line:
Billet Aluminum Flywheel
Vehicle Fitment:
Honda J35 Engines (07-08 TL, 08-17 Accord V6)
Clutchmasters Billet Aluminum Flywheel, 15 lbs, Honda J35 Engines (07-08 TL-S, 2008-17 Accord V6), FW-040-AL



15% below retail


Aluminum Flywheel : Will work with OEM Clutch kit or Clutch Masters clutch kit. A dampened hub disc is recommended, but a rigid hub disc can be used- will be more responsive with a rigid disc and may require a little more slipping on take-off.

Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry.


  • Reduced mass equals increased acceleration.
  • A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag.
  • Increased supercharger efficiency due to less parasitic drag on the crank.
  • Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel.
  • CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels.
  • CM uses High Carbon steel for the friction surface. (Replaceable)
  • CM uses an OEM steel ring gear secured by bolts.
  • CM offers a limited lifetime warranty.
  • CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2

Related products

Customer Questions


Can this flywheel be used on the 03 CL-S J32A2 engine?


It cannot, because it does not have the crank triggers needed for a J32A2. Instead we would recommend an AASCO #103212-11.

Q:Can this be used with the 2009-2014 TL SHAWD 6MT?

Yes, it sure can!

Q:can it fit 2012 TL SHAWD AT ?

No, because automatic transmission cars don't have flywheels.

Q:Does this fly wheel go with the fx250 clutch master for the 2010+ accord v6?

Yes you could use this flywheel with an FX250 clutch.

Q:Will this fit my 2007 Acura TL type S


Q:Hi i already have the flywheel but looking for the insert ring. Where can I purchase one?

Here is a link to order a replacement heat-shield for Clutchmasters Flywheels. Clutchmasters Replacement Friction Disc, Universal (Misc Applications)

Customers Also Bought



Rate and Review