My Car
Find Parts
What's New?

ATLP V2-R Quad-Tip 3" Performance Exhaust System, Resonated, 2013-17 Accord V6 Coupe, ES00014R

Part Number:
ATLP Sports-Luxury Products
Product Line:
V2-R Quad Tip Cat-Back Exhaust System (Resonated)
Vehicle Fitment:
Honda Accord, 2013-17 (2DR V6)
ATLP V2-R Quad-Tip 3" Performance Exhaust System, Resonated, 2013-17 Accord V6 Coupe, ES00014R



Using mandrel bent Stainless Steel 439 tubing, ATLP exhaust systems are extremely durable and guaranteed not to rust or break apart.

Package includes

  • Two Stainless Steel Mufflers & Four Sexy 3.5 Inch Double-Wall Tips.
  • Silent-sport German-made packing.
  • Utilizes all factory hangers.
  • Uses thick, nickel-plated flanges.

The modeled after the iconic Quad-Tip Exhaust system for the Acura TL-S. Using that influence, we developed this unique, fully custom built exhaust tuned just for the 2013+ Accord V6 Coupe.

The ATLP Quad-Tip Performance Exhaust exhaust emits a subtle and smooth tone while cruising, and a deep authoritative roar at full throttle. The J-series engine, especially the AT models, are notorious for drone, and the lack of low end throttle response. ATLP tuned the Quad-Tip system to keep drone at a minimum, while also improving throttle response. Mid-range and top end power was increased. The results satisfy, and exceeded my expectations. Of course, a resonator option is available to keep interior sound to a strict minimum while keeping the trademark tailpipe sound.

Exhaust bolts on to the third cat and runs at 3 inches, and splits off into dual 2.25"" diameter tail-pipes that directly feed into the mufflers. We were able to increase flow, while keeping throttle response peppy and lag-free.

Muffler Features

  • Four 3" polished 2-Piece tips shows the attention to detail.
  • Staggered offset accents the body line, with or without the factory optional lip kit.
  • A matte finished face and hi-polished canister gives the entire exhaust a distinct look.
  • TIG welded seams.


  • Fits 2013-15 Accord V6 Coupe (Auto/6MT)

Installation Notes

All necessary gaskets and installation hardware is included.

Factory hangers are re-used.

Related products

Customer Questions


I was looking at the options for this exhaust, but it does not show the resonated version unless it is resonated automatically?


We do not currently offer a resonated version of this exhaust. We've tuned it to have an aggressive sound that is not terribly loud without needing a resonator.


i already own RV-6 HFPC+J-PIPE+ Takeda Midpipes, does this come with just the axle back option or even cat back option?


This system is sold as a cat-back system only at this time.


Is this exhaust going to be offered with a resonator and do you have any sound clips of this exhaust on a stock car with just this catback?


We do not currently have a resonator option available, but can make the system with a resonator.

We have no clips without the other exhaust items at this time, as most people were concerned about the sound with all other components removed.


I want to do from the header all the way back . Do you have a header that fits to the j-pipe, then exhaust?


Your vehicle is not be equipped with traditional "headers." Before going further, we would suggest reading this article regarding the exhaust layout on your J-Series Engine equipped vehicle: An Outline Of The Exhaust Layout On J-Series Honda V6 Engines

We can provide a complete set of exhaust components from the engine to the tips, and will be happy to consult you on the needed items.


I really want this to be added to my 9th gen accord l4. Can this be mount onto a 9th gen I4 coupe? Will the 8th gen version of this exhaust system fit the 9th gen l4?


We believe some portion of the system can fit on a 4-cylinder Accord but we have not confirmed complete fitment. An 8th generation system we cannot say fits a 9th generation car at all.


Will this exhaust system fit the 9th gen accord sedan v6?


The coupe system is shorter than the sedan one. In order to fit a coupe system on a sedan it would need to be modified.


I was wondering if the quad tip mufflers will fit on my 2013 V6 sedan?


This coupe system will not fit a Sedan. We are prototyping a sedan system now, though. Expect one to be available soon!


Do you have a 2 1/2 inch cat back exhaust for this car?


We are offering 3" for the V6 car. A 2.5" would be more for a 4-cylinder which we may offer soon!


I noticed that this posting says that it is for the coupe and it is resonated? Also, does it cause any drone when cruising on the highway?


The resonator in this exhaust would be installed specifically to reduce or eliminate drone. Different people will have different opinions, however we feel this system is quite livable for a 3" performance exhaust!

Q:What resonator is used in the resonated ATLP systems?

A hand-made ATLP resonator is used on ATLP exhaust systems. The non-resonated systems do not come with resonators.

Q:I want the non-resonated that an option still?

Yes we have non-resonated system in stock for the 9th gen coupe V6. They are listed separately from the resonated one.

Q:Can i put this system on my i4 ?

The system will fit on an I4, although the front section may need modification to bolt to your converter pipe.

Q:Will this work with the rv6 j pipe?
A:Yes this exhaust will bolt up to an RV6 j-pipe without modification.

Customers Also Bought



Rate and Review