My Car
Find Parts
What's New?

ATLP Quad-Tip Performance Exhaust System, Resonated, 2008-12 Accord V6 Coupe, ES0008

Part Number:
ES0008
Brand:
ATLP Sports-Luxury Products
Product Line:
Quad-Tip Cat-Back Exhaust System (Resonated)
Vehicle Fitment:
Honda Accord, 2008-12 (2DR V6)
ATLP Quad-Tip Performance Exhaust System, Resonated, 2008-12 Accord V6 Coupe, ES0008

$1372.93

Details

Using mandrel bent Stainless Steel 439 tubing, ATLP exhaust systems are extremely durable and guaranteed not to rust or break apart.


Package includes

  • Two Stainless Steel Mufflers & Four Sexy 3 Inch Double-Wall Tips.
  • Silent-sport German-made packing.
  • Utilizes all factory hangers.
  • Uses thick, nickel-plated flanges.


The modeled after the iconic Quad-Tip Exhaust system for the Acura TL-S. Usiung that influence, we developed this unique, fully custom built exhaust tuned just for the 2008-12 Accord V6 Coupe.

The ATLP Quad-Tip Performance Exhaust exhaust emits a subtle and smooth tone while cruising, and a deep authoritative roar at full throttle. The J-series engine, especially the AT models, are notorious for drone, and the lack of low end throttle response. ATLP tuned the Quad-Tip system to keep drone at a minimum, while also improving throttle response. Mid-range and top end power was increased. The results satisfy, and exceeded my expectations. Of course, a resonator option is available to keep interior sound to a strict minimum while keeping the trademark tailpipe sound.

Exhaust bolts on to the third cat and runs at 2.5 inches, and splits off into dual 2.25"" diameter tail-pipes that directly feed into the mufflers. We were able to increase flow, while keeping throttle response peppy and lag-free.
 

Muffler Features

  • Four 3" polished 2-Piece tips shows the attention to detail.
  • Staggered offset accents the body line, with or without the factory optional lip kit.
  • A matte finished face and hi-polished canister gives the entire exhaust a distinct look.
  • TIG welded seams.

Application

  • Fits 2008-2012 Accord V6 Coupe (Auto/6MT)

Installation Notes

All necessary gaskets and installation hardware is included.

Factory hangers are re-used.

Here is a video showing off the classy, performance-driven tone of the ATLP Quad-Tip Performance Exhaust system:

Related products

Customer Questions

Q:

I have a 2013 Accord ex-l v6 and would hope this fits 2013 as well.

A:

This exhaust fits a 2008-12 model year Honda Accord Coupe, V6. We have a different listing for the 2013+ Accord V6 coupe models available here: ATLP Quad-Tip Performance Exhaust System, 2013-15 Accord V6 Coupe, ES00014

Q:

do i get the same aggressive tone even without a jpipe or other mods? Is this an easy bolt on swap? what gains will I be looking at for my 2009 accord v6 6 speed?

A:

Yes, you would. The J-pipe would not significantly change the sound of the cat-back in most cases. Deleting the primary cats can have an impact on the sound, though. This system does bolt on with all hardware and gaskets included.

Power gains would be in the 5-10 ft-lb range throughout the rev range.

Q:

I have the ATLP Quad-Tip Performance Exhaust (ES0008) on a 2012 Accord Coupe, it's too loud in the car. What resonator do I order to tone it down? Your part # please...

A:

Please order this resonator to quiet down the system more to your liking: ATLP Magnaflow Resonator for use with 2.5" Exhaust Cat Backs

Q:

I want to do from the header all the way back . Do you have a header that fits to the j-pipe, then exhaust?

A:

Your vehicle is not be equipped with traditional "headers." Before going further, we would suggest reading this article regarding the exhaust layout on your J-Series Engine equipped vehicle: An Outline Of The Exhaust Layout On J-Series Honda V6 Engines

We can provide a complete set of exhaust components from the engine to the tips, and will be happy to consult you on the needed items.

Q:

does this exhaust require any modification to the hfp rear lip or is it direct fit without any modification?

A:

This is a direct fit exhaust with no modification needed, even with the HFP rear lip!

Q:

So what is the next stage or upgrade from stock our stock "headers" (manifold)?

A:

The car is designed with the manifold built into the cylinder head. There really is no replacement for it although there are converter deleted and the J-pipe which come off the heads. Learn more about the layout of your exhaust and the popular upgrades here: An Outline Of The Exhaust Layout On J-Series Honda V6 Engines

Q:What resonator is used in the resonated ATLP systems?
A:

A hand-made ATLP resonator is used on ATLP exhaust systems. The non-resonated systems do not come with resonators.

Customers Also Bought

Ratings

Overall:
Fitment:
Performance / Function:
Craftsmanship / Quality:

Reviews

  • Simply amazing! November, 25
    By Amanda, Spirited/Stylish Commuter
    Excellent fitment and quality with easy installation. This is, hands down, the best looking exhaust for the 8th gen accord and sounds absolutely amazing (not too loud or droning) especially when combined with an intake.

Rate and Review