My Car
Find Parts
What's New?

AEM Performance V2 INTAKE SYSTEM, 2004-08 Acura TL & Type-S, 24-6110C

Part Number:
24-6110C
Brand:
AEM Induction Systems
Product Line:
V2 Cold Air Intake System
Vehicle Fitment:
Acura TL, 2004-08 (ALL Base, Sport, & Type-S)
Color:
Silver
AEM Performance V2 INTAKE SYSTEM, 2004-08 Acura TL & Type-S, 24-6110C

$476.89

$323.99

32% below retail
Shipping Included! Need help?

Details

AEM’s V2 intake systems use a patented dual chamber design to produce the most power and torque of any other intake system available—even our own Cold Air systems.

On a dyno graph, the area under the power band (or power curve) represents the amount of effort that an engine is producing. The larger the overall area under the curve, the more power your engine is making. The AEM V2 utilizes a dual chamber (using two different diameters and lengths of piping) that creates multiple frequency sound waves to produce the largest area under the curve of any intake system on the market. These sound waves help charge the cylinders with more air throughout the entire rpm range and are what enables the V2 to outperform even our own Cold Air systems.

We have found that inlet length plays a vital role in the power production of V2 systems and not all V2 induction systems relocate the filter outside of the engine compartment. In these cases, we performed extensive temperature testing to locate the filter in the coolest area of the engine compartment to achieve the lowest inlet temperatures possible. Please refer to our temperature testing procedures for more information.


    * Outperforms every intake system on the market, even our own Cold Air intakes
    * 50-state legal or pending legality
    * Patent #6,959,679
    * Manufactured and assembled in the USA
    * Inlet constructed of lightweight aircraft aluminum and mandrel bent for maximum flow
    * Reinforced TIG-welded brackets and fittings deliver added durability
    * Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
    * AEM’s lifetime DRYFLOW Synthetic air filter is 99.4% efficient, filters to one micron, and never needs filter oil!
    * Comprehensive installation instructions, decals and license plate frame included
    * Available in a powdercoated titanium-look finish
    * Guaranteed for life

Related products

Customer Questions

Q:

What color options are there ?

A:

This intake only comes in one color, the standard gunmetal grey shown.

Q:

I've heard that if this intake is installed on a car with fog lights (such as a Type-S mode) that it will hit. There is even a review stating that on this site. Is it true?

A:

We have installed this intake on a few TL-Ss and have not found there to be any fitment concern. It may have to do with the installation process.

Q:

Should there be any concerns about water ingestion with heavy rain?

A:

No, there should not be any concerns in heavy rain. Only driving through a flood would really cause a problem with this intake.

Q:

Will this work with my 2008 acura tl-s

A:

Yes, as listed this intake works on all 2004-08 Acura TL models, including the Type-S.

Q:

Quick question. My exhaust is "stage 3" with some Mangaflows in the back and I was wondering if this would increase the sound in the mid-high range. Since it's only loud from around 1-3.2K for my car.

A:

Intakes will make a loud induction-type sound when you are giving it throttle. You'll hear the engine more the deeper into the gas pedal you get. The sound will be there at all RPMs, and may change a bit from low to high. But, as stated, the throttle position will make an "intake" sound louder.

Q:

will i need to relocate battery ?

A:

No, this intake installs perfectly with the batter in the stock location.

Q:Where are the HP and torque gains for this V2 intake? Low, mid or high RPM range?
A:

Heeltoe has researched and has not been able to find dyno charts to graphically answer your question. In our experience, these intakes are most effective as the RPM increases. They would not typically lose lower RPM power, but would tend to show greater power gains in higher RPM. The V2 design is meant to help response in roll-on throttle conditions. This intake is our most popular application for the 2004-08 TL. Note that it is actually an Accord part but fits the TL quite excellently.

Q:Would there be any problem using this intake in conjunction with the Takeda/aFe Silver Bullet Throttle Body Spacer? Any additional hardware needed or inconsistencies with the two parts that would prevent them from being used together? Application is a 2008 Acura TL-S.
A:

Adding spacers to the throttle body and intake manifold will impact your intake system install. You'll need to adjust the fitment a bit. It can get tight but you can make it work.

Q:This intake is made for the accord and will not pass the visual smog on the TL.
A:

That is a correct statement.

Q:What is the diameter of the piping?
A:

Inlet is 4 inches and outlet is 3 inches.

Customers Also Bought

Ratings

Overall:
Fitment:
Performance / Function:
Craftsmanship / Quality:

Reviews

  • Pretty solid product. September, 18
    By Dylan Boissey, Spirited/Stylish Commuter
    Installed in a 2006 acura TL I just picked up. Installation is quite straightforward. Instructions and hardware that are included are good quality. Surprisingly noticeable but welcome deep "growl" especially past 4k. Slightly noticeable torque increase throughout the powerband. So far It seems like a solid investment.
  • AEM Performance V2 INTAKE SYSTEM November, 21
    By Dustin, Spirited/Stylish Commuter
    08 tls 6 mt, race pipe, 3rd muffler delete.sounds great and added some HP.not happy how the air filter rest on my stock fog light.I think it could have fit better.

Rate and Review