Home
::
RV6 Performance Long Tube J-Pipe, 2008- Honda Accord V6 , jpipe.v3.cp
|
|
RV6 Performance Long Tube J-Pipe, 2008- Honda Accord V6 , jpipe.v3.cp
Introducing the RV6 long tube J-pipe for the 2008+ 8th generation Accord. This design is based off our existing long tube V3 Jpipe for the 7th generation Accord and 3rd generation TL. Much care was taken in order to equalize runner length and most importantly maximize ground clearance. By completely removing the 3rd cat, runner length maximized in order to take full advantage of exhaust gas scavenging.
Features:
2.25" Primaries
2.5" Outlet
Mandrel bends
TIG welding
Stainless 304 Piping and flanges
Dyno tests were performed on a 09 automatic Accord V6 with 23k miles using an AWD Mustang dyno. Due to the nature of the automatic transmission we were unable keep the car in 3rd gear for a full dyno pull. Instead we did a 1st to 3rd gear run to capture all the data. As you can see from the dyno a good amount of WHP and WTQ was gained. We are currently looking for a 6 speed 8th generation Accord for testing.
Please use the link below to ask us anything about this product! It's great for:
- Stock Checks
- Installation Questions
- Compatibility or Applications Concerns
- Or any other question related to this product!
|
 |
|
Ask a question about this product
|