J's Racing CL7 Tsuchinoko Intake Kit - Carbon for early models 04-05 CL9 TSX/CL7 Accord EuroR, TCC-E2-M

Material: CFRP&FRPApproximately, the long development period which crosses 1 and trial and error was repeated, the accord CL7 private air intake system which assures secure power rise completed.With a year long research & development, this intake has been perfected as a sure "power-up" product for the CL7.The chamber and the air filter are located inside the special cover which prevents hot air from going into the system from the engine bay.Fresh air is taken from a unique duct inside the front bumper. The newly designed wall plate guides the air into the large air filter through the front fender with a ram air effect. The new design also prevents rain from affecting the system and also protects the filter.Barely by the fact that you supply the chamber and the air filter part which utilize the engine compartment space effectively while slanted thermal covering, it is possible always to adopt the fresh air, without sucking the ardor inside the engine compartment.Setting the private air duct of attachment inside the bumper.With this technique from inside the bumper the fresh air which is obtained to inhalation box of bulk passes by inside the fender which is converted due to the private partition plate, leads the ram air to with the air filter of the large apertureFurthermore way it does not depend on the filter directly, the rain and the like which becomes matter of concern with private partition form the design.It clears also the travelling test at the time of the rainy weather where the precipitation is many.Power check was done in order of the normal imitation [eakurina] hammer saw chamber.The engine is normal with all same car ?q.Being able to meet in this case, executing the efficiency test of the chamber itself without sending the wind of the fan to inhalation side.Power of course is, but attention in dramatic improvement of torque.In addition, the hammer saw chamber which it has an influence on the travelling wind largely promises the power & torque improvement above the data by travelling.Set contents: Carbon FRP slanted thermal cover FRP chamber itself FRP private partition plate private [eadakuto] [huirutajiyointo] private [eahuiruta] hoses J'SRACING [gorudoenburemu] each joint/band/volts/bolts installation instruction manual attachment

Please use the link below to ask us anything about this product! It's great for: Stock Checks Installation Questions Compatibility or Applications Concerns Or any other question related to this product!
Ask a question about this product