|
Home
::
Comptech Supercharger Kit 05 TSX 6 Speed 350-050
|
The kit is complete with cast aluminum supercharger manifolds, all mounting brackets, as well as all necessary hardware. The kit requires no major modifications, and the car can be easily returned to stock.
All CT Engineering Supercharger Systems are 50 state emissions legal and include a CARB decal for street use in California.
Product enhancements: Additional power and engine response is available with the addition of a CT Engineering Cold Air Intake, Header, and Cat-Back Exhaust System.
# Adds approximately 50 Horsepower and 30 lb/ft. of Torque at the wheels
# rque band is widened to between 3,000 and 7,000 RPM
# Very linear increase in boost as RPMs increase
# Impressive mid-range throttle response and top-end performance
# Completely "bolt-on" kit requires no engine modifications
# Includes tool to modify factory Fuel Pressure Regulator (located in the fuel tank) to the exact pressure required by the Supercharger, and a new Intake Tube to connect either the stock air intake or CT Engineering Cold Air Intake Kit
# Utilizes the Eaton M62 blower, making approximately 5psi of boost
# Tuning is handled by both the CT Engineering ACM (Advanced Control Module) and by a Re-Flash of the stock ECU.
# ACM comes with complete wiring harness. No cutting or splicing of wires is required
# VTEC is lowered to 3,000 RPM from 6,000, and Camshaft Angle is advanced to 20 degrees between 2,000 to 7,000 RPM only under boost conditions
# Requires customer to send in ECU, Immobilizer Module, and Keys
# 50 State Street Legal, and CARB Certified for street use in California
# Application: 04 Acura TSX (Manual Transmission Only)
Please use the link below to ask us anything about this product! It's great for:
|
![]() |
| Ask a question about this product | |
|
|||||||
|
| Check on my orders | I Cant Find It! | Installs | Ask Marcus | About |